This is first Enigma2 receiver with BCM processor from Opticum. AX Odin is updated version of already famous Galaxy Innovations Genius receivers. It is produced in Korea, in the same factory where xtrend receivers.
Opticum AX Odin comes only with one Linux operating system Enigma2, which is main difference from older Odin M7 receivers. It also has new drivers and 750 DMIPS application CPU. It works with the same e2 images as Galaxy Innovations Genius.So Opticum AX Odin already has Enigma2 firmware support from OE-Alliance members such as Odin team, OpenPL, Zebradem, OpenATV, SIF Team, PB-Enigma team and many more!
An updated version of the popular HD satellite receiver Opticum X403p on the new dual core processor ALI 3606. Now, this unit supports a maximum resolution - Full HD 1080p, processor speed is 400 MHz and doubled the amount of flash memory.
The device has an optimal weight with 1.2 kg! The size is with (B, H, D) 280 x 55 x 235 mm in a good area. Lots of connections! Under the hinged front panel, there are 1x USB, 1x 1x CX and CI. On the back we see AV, Ethernet, S / PDIF, 0/12V, Scart, HDMI, USB, SAT IN, loop out, and the on / off switch. No more looking for cables! The 140cm long power cord is firmly installed. The many air vents cause the metal housing that the HD X406p not overheat.
Receiver is supplied with extensive and visually stunning remote control (batteries included).
The Opticum HD X406p looks very high and noble. This is done expanding and collapsing of the front panel by pressing mechanism. Thanks to the four rubber feet on the slide receiver when you press no back and forth. Under the panel there are eight controls. If the remote control is gone, so the device can be operated. Although not fully functional, but with the basics. The 4-digit display shows the on-mode, the current space program and in standby mode, the Clock.
Receiver has USB port 2.0, card reader and CI slot. internal card reader with official firmware supports Conax, cards, but with updated ( patched firmware) a variety of cards are supported Secca, Viaccess, Irdeto,etc. In case if your interesded encription system is not supported, you can still use CI slot for CAM-module for compatibility issues.
Opticum HD X406p is equipped with modern satellite receiver that supports reception of signals in a standard DVB-S and DVB-S2. At the same time used a new ALI 3606 processor with a clock frequency of 400 MHz, which allows the same stability to cope with viewing channels in both standard and high-resolution HD. And the declared support of the blind channel scanning, which allows you to automatically determine the parameters of the transponder from the satellite, without the need for prescription in the manual mode. Compared with Opticum HD X403p, in the receiver was also increased the amount of flash memory twice, and now he is - 8 Mb, which in turn will add additional firmware functions.
The boot process takes a test in 26 seconds. The menu is clearly structured and user-friendly. A glance inside the menu: There are also games. However, these are more suitable for undemanding, because not every child is content with games like Snake or other pixel games.
The switching times are very good. One click and the unit within one second to the next station. Everything is under control! If you press the OK button on the remote you get access to all selected, free, or encrypted HD channels. The FAV menu can be created quickly and easily. For this there are also categories like movies, music, sports or news. The EPA is also very well designed.
Opticum HD X406p has the function of a digital VCR. To activate it necessary to connect a hard drive or flash drive via one of two available USB 2.0 interface. At the same time it allows you to not only record channels in standard and high definition, but one channel while recording another channel can be viewed, but this function is supported within a single transponder. It is also possible to use the delayed viewing programs - TimeShift, with the resumption of view after removal of the pause. And in addition to all other device supports playing movies in the format (*. Mpg) to an external drive, in addition to music, and photos.
Present in Opticum HD X406p LAN port enables the receiver to make a connection to a computer network that has access to the global network Internet. Which will update the device software and also implement advanced features of viewing pay channels, if you use the firmware that supports the required parameters. ( Cardsharing ). Popular Newcamd and Cccam protocols are supported!
Summary: If you need an inexpensive and modern HDTV receiver that allows you to not only watch but also to record, supports the work of the Internet to view the maximum number of available channels, then Opticum HD X406p is receiver for you.
Our sponsor www.sat24store.com has this receiver in stock only for 90€!!!
ENG: Today we proudly present direct competition to Ferguson Ariva 200. Opticum HD X403p is satellite receiver that lets you receive SD and HD channels in both MPEG-2 and in MPEG-4/H.264. compression.
The receiver has a tuner capable of processing signals in DVB-S2 standard and works in high resolution 1280x720p, 1920x1080i, 720x576p, 720x576.
The receiver also complies with strict EU standards on energy consumption of the receiver in standby mode, which is less than 1W, even though the manufacturer stated on its website or in the accompanying manual. Measurements I made a certified meter and the consumption was 0.6 W in standby mode.
Opticum X403p is equipped with a fast processor clock speed 396 MHz RAM manufacturer indicates 1024 MB flash memory is 32 megabytes.
The receiver comes in black, dimensions are relatively small: 220 x 40 x 160 mm (W x H x D). The front panel contains operation button and four-digit numeric display. Under the hinged lid there is one universal decoder card reader and a one CI slot.
On the back panel is located two F connectors (input and output tuner), the TV SCART, SPDIF coaxial connector, two audio RCA output jacks and an RCA video output. Furthermore, there is an HDMI connector to connect to your LCD or Plasma TV, plus a 12V output, and of course there is a network Ethernet 10/100 Mbps, RS-232 connector and a USB 2.0 port. The great news is that updated with latest firmware, receiver can work with different cardsharing emulators (also Cccam server 2.14 and 2.2.1) and can read several official viewing cards, included Portuguese Meo card and Polish Cyfra+ card.
PT: Hoje temos o orgulho de apresentar principal competitor de Ferguson Ariva 200 - Opticum HD X403p é receptor de satélite que permite receber canais HD e SD tanto no formato MPEG-2 como MPEG-4/H.264. compressão.
O receptor possui um sintonizador capaz de processar sinais no padrão DVB-S2 e trabalha em alta resolução 1280x720p, 1920x1080i, 720x576p, 720x576.
O receptor também está em conformidade com as normas rigorosas da UE no consumo de energia do receptor em modo de espera, que é menos de 1W, apesar de o fabricante declarou em seu site ou no manual que o acompanha.
Opticum X403p está equipado com um processador de velocidade 396 MHz, 1024 MB RAM é 32 megabytes de memória flash.
O receptor vem na cor preta, são relativamente pequenas dimensões: 220 x 40 x 160 mm (W x H x D). O painel frontal contém botões de operação e display, sob a tampa articulada há um leitor de cartão universal decodificador e um slot CI.
No painel traseiro está a dois conectores F (entrada e saída do sintonizador), o SCART TV, conector SPDIF coaxial, duas tomadas de saída áudio RCA e uma saída de vídeo RCA. Além disso, há um conector HDMI para conectar a sua TV LCD ou Plasma, além de uma saída de 12V, e é claro que há uma rede Ethernet 10/100 Mbps, conector RS-232 e uma porta USB 2.0.
Atualizado com firmware mais recente, o receptor pode trabalhar com diversos emuladores cardsharing Cccam (também servidor cccam 2.14 e 2.2.1), Newcamd, Camd e são capazes de ler vários cartões oficiais de televisão paga, incluído cartão Meo de Portugal e Cyfra + de Polonia.OPTICUM - HD X403p technical characteristics.
One slot for Smart Card
One Slot for Common Interface Module
Support of SD / HD (MPEG2 / MPEG4 H.264), DVB-S, DVB-S2 system
High resolution video output - HDMI
Standard resolution video output - SCART, RCA
Supported video resolutions - 576p, 720p, 1080i
Front panel display - LED 4 digit
Digital audio output S/PDIF - coaxial
Analog audio output - RCA stereo
Software update by USB, RS-232C
12V out for connecting external devices
Lan connector (Ethernet)
USB connector compliant with USB 2.0 standard
Low power consumption in Stand-by mode, below 1W
Automatic Stand-By mode after 3 hours from last using receiver for power saving
Compatible with Diseqc 1.0, 1.1, 1.2, and USALS
Electronic Program Guide - EPG
Multilngual Menu, including English
Time Shift (video pausing, rewinding)
PVR Ready - possibility to record on external USB drive
Recording one channel and watch another FTA channel within a single transponder
Blind Scan supported
Parental Lock for channels and Menu
Possiility to save up to 5000 channels (TV and Radio)
Fast channels switching
Possibility of creating own channels lists
Possibility of creating Favourite Lists
Sort / Group / Channels search options
Channel Editing features -Remove, Lock, Skip, Move, Rename
Subtitle support - Teletext and DVB
Tool to convert files for playback on your computer
Build-in Dolby Digital decoder (downmix to stereo)
Colour - black
OPTICUM USB HDD supported
Support connection to an external FTP server (FTP client)
# Two slots for Smart Cards in Conax system
# Two Slots for Common Interface Modules
# Support of SD / HD (MPEG2 / MPEG4 H.264), DVB-S, DVB-S2, DVB-T system
# Supported bandwidth - 6MHz, 7MHz or 8MHz
# High resolution video output - HDMI, YPbPr
# Supported video resolutions - 576p, 720p, 1080i
# Text front panel display - VFD 8 characters
# Digital audio output S/PDIF - optical
# Analog audio output - RCA stereo
# Software update by USB, RS-232C
# 0/12V out for connecting external devices
# LAN connector (Ethernet)
# USB connector compliant with USB 2.0 standard
# Low power consumption in Stand-by mode, below 1W
# Automatic Stand-By mode after 3 hours from last using receiver for power saving
# Compatible with Diseqc 1.0, 1.1, 1.2, and USALS
# Electronic Program Guide - EPG
# Multilngual Menu, including English
# Time Shift (video pausing, rewinding)
# PVR Ready - possibility to record on external USB drive
# Parental Lock for channels and Menu
# Video games
# Fast channels switching
# Possibility of creating own channels lists
# Possibility of creating Favourite Lists
# Sort / Group / Channels search options
# Channel Editing features -Remove, Lock, Skip, Move, Rename
# Subtitle support - Teletex and DVB
# Teletext support
# Build-in Dolby Digital decoder (downmix to stereo)
# Colour - black
# OPTICUM USB HDD supported
# TNK card compliant
# Configuration for HD XTS703p, HD XTS703